100% Original 10 Bolt Hub And Spindle - High standard Canter FE111 Front Hub Bolt – JINQIANG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We always follow the principle Quality Very first, Prestige Supreme. We have been fully committed to delivering our customers with competitively priced high-quality products and solutions, prompt delivery and experienced services for Spring Tie Bolt, Roller Follower, Steering Column Bearing, We welcome you to definitely stop by our manufacturing facility and sit up for creating pleasant organization relationships with clients in your own home and overseas while in the in the vicinity of long term.
100% Original 10 Bolt Hub And Spindle - High standard Canter FE111 Front Hub Bolt – JINQIANG Detail:

Product description

Wheel nuts are an easy and cost-effective way to make wheels safer and more reliable, increasing production and operating efficiency. Each nut is combined with a pair of lock washers with a cam surface on one side and a radial groove on the other side.
After the wheel nuts are tightened, the cogging of the Nord-Lock washer clamps and locks into the mating surfaces, allowing only movement between the cam surfaces. Any rotation of the wheel nut is locked by the wedge effect of the cam.

Advantages of company

1. Integrating production, sales and service: rich experience in the industry and rich product categories
2. Years of production experience, the quality can be assured: not easy to deform, anti-corrosion and durable, reliable quality, support customization

Our Hub bolt quality standard

10.9 hub bolt

hardness 36-38HRC
tensile strength  ≥ 1140MPa
Ultimate Tensile Load  ≥ 346000N
Chemical Composition  C:0.37-0.44  Si:0.17-0.37  Mn:0.50-0.80   Cr:0.80-1.10

12.9 hub bolt

hardness 39-42HRC
tensile strength  ≥ 1320MPa
Ultimate Tensile Load  ≥406000N
Chemical Composition C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70   Cr:0.15-0.25

FAQ

1.Can you accept L/C payment terms?
A.Can cooperate by TT,.L/C and D/P payment terms

2.What is your main market?
Europe, America, Southeast Aisa, Middle East, Africa ETC.

3.What is your logo?
Our logo is JQ and we could also print your own registered logo

4. What is the grade of your products?
A.Hardness is 36-39,tensile strength is 1040Mpa
B.Grade is 10.9

5.How many staff do your factory have?
200-300affs we have

6.When did your factory found?
Factory was founded in 1998,with more than 20 years experience

7.How many squares of your factory?
23310 squares


Product detail pictures:

100% Original 10 Bolt Hub And Spindle - High standard Canter FE111 Front Hub Bolt – JINQIANG detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 100% Original 10 Bolt Hub And Spindle - High standard Canter FE111 Front Hub Bolt – JINQIANG , The product will supply to all over the world, such as: Sweden, Niger, Frankfurt, We are in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
  • High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Riva from Ecuador - 2018.09.21 11:01
    High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Antonia from Mozambique - 2017.08.15 12:36
    Write your message here and send it to us