Factory Cheap Hot High Tensile Wheel Bolt - NPR TRUCK REAR Wheel Bolt factory wholesale – JINQIANG Detail:
Manufacturing process of high strength bolts
Shelling and descaling of high-strength bolts
The process of removing iron oxide plate from cold heading steel wire rod is stripping and descaling. There are two methods: mechanical descaling and chemical pickling. Replacing the chemical pickling process of wire rod with mechanical descaling improves productivity and reduces environmental pollution. This descaling process includes bending method, spraying method, etc. The descaling effect is good, but the residual iron scale cannot be removed. Especially when the scale of the iron oxide scale is very strong, so the mechanical descaling is affected by the thickness of the iron scale, the structure and the stress state, and is used in carbon steel wire rods for low-strength fasteners. After mechanical descaling, the wire rod for high-strength fasteners undergoes a chemical pickling process to remove all the iron oxide scales, that is, compound descaling. For low carbon steel wire rods, the iron sheet left by mechanical descaling is likely to cause uneven wear of grain drafting. When the grain draft hole adheres to the iron sheet due to the friction of the wire rod and the external temperature, the surface of the wire rod produces longitudinal grain marks.
Our Hub bolt quality standard
10.9 hub bolt
| hardness | 36-38HRC |
| tensile strength | ≥ 1140MPa |
| Ultimate Tensile Load | ≥ 346000N |
| Chemical Composition | C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 |
12.9 hub bolt
| hardness | 39-42HRC |
| tensile strength | ≥ 1320MPa |
| Ultimate Tensile Load | ≥406000N |
| Chemical Composition | C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70 Cr:0.15-0.25 |
FAQ
Q1: What else products you can make without wheel bolt?
Almost all kinds of truck parts we can make for you. Brake pads, center bolt, U bolt, steel plate pin, Truck Parts Repair Kits, casting, bearing and so on.
Q2: Do you have an International Certificate of Qualification?
Our company has obtained the 16949 quality inspection certificate, passed international quality management system certification and always adhere to automotive standards of GB/T3098.1-2000.
Q3: Can products be made to order?
Welcome to send drawings or samples to order.
Q4: How much space does your factory occupy?
It’s 23310 square meters.
Q5: What is the contact information?
Wechat, whatsapp, E-mail, mobile phone, Alibaba, website.
Q6: What kind of materials are there?
40Cr 10.9,35CrMo 12.9.
Q7: What is the surface color?
Black phosphating, gray phosphating, Dacromet, electroplating, etc.
Q8: What is the annual production capacity of the factory?
About a million pcs of bolts.
Product detail pictures:
Related Product Guide:
Responsible excellent and fantastic credit rating standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of quality initial, buyer supreme for Factory Cheap Hot High Tensile Wheel Bolt - NPR TRUCK REAR Wheel Bolt factory wholesale – JINQIANG , The product will supply to all over the world, such as: Kenya, Amsterdam, Kenya, Adhering to the principle of Enterprising and Truth-Seeking, Preciseness and Unity, with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective solutions and meticulous after-sales service. We firmly believe that: we're outstanding as we have been specialized.
By Matthew Tobias from Myanmar - 2018.09.29 13:24
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Joanna from Orlando - 2017.09.26 12:12
