Free sample for Wheel Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Steering Wheel Bracket, Galvanized Steel U Bolts, 10.9 High Tensile Center Bolt, We promise to try our best to provide you with high quality and efficient services.
Free sample for Wheel Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG Detail:

Product description

Hub bolts are high-strength bolts that connect vehicles to the wheels. The connection location is the hub unit bearing of the wheel! Generally, class 10.9 is used for mini-medium vehicles, class 12.9 is used for large-sized vehicles! The structure of the hub bolt is generally a knurled key file and a threaded file! And a hat head! Most of the T-shaped head wheel bolts are above 8.8 grade, which bears the large torsion connection between the car wheel and the axle! Most of the double-headed wheel bolts are above grade 4.8, which bear the lighter torsion connection between the outer wheel hub shell and the tire.

Advantage

• Quick and easy installation and removal using hand tools
• Pre-lubrication
• High corrosion resistance
• Reliable locking
• Reusable (depending on usage environment)

Our Hub bolt quality standard

10.9 hub bolt

hardness 36-38HRC
tensile strength  ≥ 1140MPa
Ultimate Tensile Load  ≥ 346000N
Chemical Composition  C:0.37-0.44  Si:0.17-0.37  Mn:0.50-0.80   Cr:0.80-1.10

12.9 hub bolt

hardness 39-42HRC
tensile strength  ≥ 1320MPa
Ultimate Tensile Load  ≥406000N
Chemical Composition C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70   Cr:0.15-0.25

Manufacturing process of bolts

1、Spheroidizing annealing of high-strength bolts

When the hexagon socket head bolts are produced by the cold heading process, the original structure of the steel will directly affect the forming ability during cold heading processing. Therefore, the steel must have good plasticity. When the chemical composition of the steel is constant, the metallographic structure is the key factor determining the plasticity. It is generally believed that the coarse flaky pearlite is not conducive to cold heading forming, while the fine spherical pearlite can significantly improve the plastic deformation ability of the steel.
For medium carbon steel and medium carbon alloy steel with a large amount of high-strength fasteners, spheroidizing annealing is performed before cold heading, so as to obtain uniform and fine spheroidized pearlite to better meet the actual production needs.

2、 Shelling and descaling of high-strength bolts

The process of removing iron oxide plate from cold heading steel wire rod is stripping and descaling. There are two methods: mechanical descaling and chemical pickling. Replacing the chemical pickling process of wire rod with mechanical descaling improves productivity and reduces environmental pollution. This descaling process includes bending method, spraying method, etc. The descaling effect is good, but the residual iron scale cannot be removed. Especially when the scale of the iron oxide scale is very strong, so the mechanical descaling is affected by the thickness of the iron scale, the structure and the stress state, and is used in carbon steel wire rods for low-strength fasteners. After mechanical descaling, the wire rod for high-strength fasteners undergoes a chemical pickling process to remove all the iron oxide scales, that is, compound descaling. For low carbon steel wire rods, the iron sheet left by mechanical descaling is likely to cause uneven wear of grain drafting. When the grain draft hole adheres to the iron sheet due to the friction of the wire rod and the external temperature, the surface of the wire rod produces longitudinal grain marks.

FAQ

Q1. how is your production management and quality control system?
A:There are three testing process to ensure product quality.
B:Products 100% detection
C:The first test: raw materials
D:The second test: semi-finished products
E:The third test: the finished product

Q2. Can your factory print our brand on the product?
Yes. Customers need to provide us a logo usage authorization letter to allow us to print customer’s logo on the products.

Q3. Is your factory able to design our own package and help us in market planning?
Our factory has more than 20 years experience to deal with package box with customers’ own logo.
We have a design team and a marketing plan design Team to service our customers for this

 


Product detail pictures:

Free sample for Wheel Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG detail pictures


Related Product Guide:

We emphasize advancement and introduce new products and solutions into the market each year for Free sample for Wheel Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG , The product will supply to all over the world, such as: Slovakia, Toronto, Gambia, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
  • On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Andrew Forrest from Canada - 2018.11.06 10:04
    Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By Modesty from Sao Paulo - 2018.10.09 19:07
    Write your message here and send it to us