Good quality Trailer Hub Wheel Studs - scania heavy truck wheel bolt – JINQIANG Detail:
Product description
Hub bolts are high-strength bolts that connect vehicles to the wheels. The connection location is the hub unit bearing of the wheel! Generally, class 10.9 is used for mini-medium vehicles, class 12.9 is used for large-sized vehicles! The structure of the hub bolt is generally a knurled key file and a threaded file! And a hat head! Most of the T-shaped head wheel bolts are above 8.8 grade, which bears the large torsion connection between the car wheel and the axle! Most of the double-headed wheel bolts are above grade 4.8, which bear the lighter torsion connection between the outer wheel hub shell and the tire.
Manufacturing process of bolts
high-strength bolt heat treatment
High-strength fasteners must be quenched and tempered according to technical requirements. The purpose of heat treatment and tempering is to improve the comprehensive mechanical properties of fasteners to meet the specified tensile strength value and yield ratio of the product.
The heat treatment process has a crucial impact on high-strength fasteners, especially its intrinsic quality. Therefore, in order to produce high-quality high-strength fasteners, advanced heat treatment technology and equipment must be available.
Our Hub bolt quality standard
10.9 hub bolt
| hardness | 36-38HRC |
| tensile strength | ≥ 1140MPa |
| Ultimate Tensile Load | ≥ 346000N |
| Chemical Composition | C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 |
12.9 hub bolt
| hardness | 39-42HRC |
| tensile strength | ≥ 1320MPa |
| Ultimate Tensile Load | ≥406000N |
| Chemical Composition | C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70 Cr:0.15-0.25 |
FAQ
Q1. What is your MOQ for processing? Any mould fee? Is the mould fee refunded?
MOQ for fasteners: 3500 PCS. to the different parts,charge mould fee, which will be refunded when reaching a certain quantity, more fully described in our quotation.
Q2. Do you accept the use of our logo?
If you have a large quantity, we absolutely accept OEM.
Q3. Are you trading company or manufacturer ?
A: We are factory.
B. We produce products in house to ensure the quality. But sometimes we can help on local purchase for your extra convenience.
Q4. Do you provide samples ? is it free or extra ?
Yes, we could offer the sample for free charge if the samples in stock but do not pay the air cost.
Product detail pictures:
Related Product Guide:
Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Good quality Trailer Hub Wheel Studs - scania heavy truck wheel bolt – JINQIANG , The product will supply to all over the world, such as: Munich, Guyana, Plymouth, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Lillian from Turin - 2018.09.16 11:31
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Albert from Los Angeles - 2017.10.25 15:53
